Three Easy Steps with H-Pette
STEP 1
Place H-Pette’s cannula in the center of the stopper of the collection tube. Gently press until the cannula completely penetrates the septum. The tube is now ready for use. Caution: Cannula is sharp; care should be taken in handling.
STEP 2
Invert tube at an angle as shown (blade side up, if bladed). Gently press the round edge of the H-Pette to the glass slide to transfer sample to the slide.
STEP 3
(H-Pettes with Blade) Rotate tube to turn paddle side down. Grasp the circular disc as shown and use the paddle to make a smear just as you would a glass slide. A 15-25- angle of incidence gives optimum results. H-Pette can be removed or disposed with the collection tube.
Product No. / Item
3611 – H-Pette without Blade – 1000 pieces
3612 – H-Pette with Blade – 1000 pieces
3613 – H-Pette Remover – 1/pkg
3615 – H-Pette II (No Blade, Metal Cannula) 1000 pieces
Tests:
Whole Blood Activated Clotting Time (ACT). Accepts Actalyke ACT Tubes with celite, kaolin, glass-bead activators; MAX-ACT Tubes with blended activators; all International Technidyne Hemochron tubesDownload Brochure:
Helena Subsidiary - Labcon North America
Avantor-VWR presented Labcon with their highest supplier honor by awarding Labcon "Supplier of the Year" for performance in 2017.
Helena’s subsidiary, Labcon North America offers a wide range of state-of-the-art disposable plastics including POC dispensers, such as H-Pette, C-Pette and U-Pette, leakproof urine cups, centrifuge tubes and a wide range of pipette tips.
