Helena QuickGel
Quality on a smaller scale - that’s what the QuickGel system is all about. QuickGel electrophoresis products are compact and easy-to-use, allowing cost-effective manual separation without sacrificing quality or accuracy. QuickGel kits are designed for running up to 10 samples per run with the new stand-alone QuickGel Chamber. Some assays allow purchase of additional applicators to accommodate up to 20 samples per gel. For small runs on the automated SPIFE system, we recommend the SPIFE QuickGel kits. Like all of Helena’s premium agarose gels, buffer ridges are built in for ease of use. Separations are crisp and clear.
The QuickGel Chamber provides temperature-controlled electrophoresis, incubation, and drying in a tiny 8.5” x 10.5" footprint. The QuickGel Chamber can be used with most external electrophoresis power supplies. Carbon electrodes are built directly into the chamber lid. With a quick change of the lid, the QuickGel Chamber also serves as an incubator and dryer. No additional equipment or expense.
| Cat. No. |
Item |
| 1284 |
QuickGel Chamber |
| 9107 |
Service Manual for QuickGel Chamber |
Additional Supplies for QuickGel Chamber |
| Cat. No. |
Item |
| 1280 |
QuickGel Replacement Carbon Electrodes |
| 1280 |
QuickGel Replacement Carbon Electrodes |
| 1282 |
QuickGel Replacement Electrophoresis Lid with Carbon Electrodes |
| 1285 |
QuickGel Chamber Contact Sheets |
| Input Power: 100-240 Vac |
| Frequency Rating: 47-63 Hz |
| Current Rating: 3 Amps |
Dimensions: High x Wide x Deep - 5.5 in. (13.97 cm) x 8.5 in.
(21.59 cm) x 10.5 in. (26.67 cm) |
| Weight: < 16 pounds |
| Operating Environment: 15° to 27°C (59° to 80°F) |
| Electrophoresis Media Accepted: QuickGel type |
| Leads: Sheathed banana plug leads |
| Cooling: Electrophoresis Temperature controlled at 16°C (±3°C) |
| Heating: Drying Temperature controlled at 67°C (±5°C) |
| Electrodes are contained within the electrophoresis lid |
| Electrophoresis Voltage Range: 0-650VDC at 100mA |
 QuickGel Applicator
The QuickGel applicator system provides precise sample application and tight crisp electrophoresis patterns. Mylar application tips prevent protein adherence. Up to 10 samples can be applied simultaneously. The QuickGel applicator applies samples directly to the gel using the alignment guide built into the QuickGel Chamber. |
|
QuickGel Applicator System
| Cat. No. |
Item |
| 1265 |
QuickGel Applicator |
| 1266 |
QuickGel Applicator Base |
| 1267 |
QuickGel Applicator Weights (2/pkg) |
| 1268 |
QuickGel Dispo Cup Tray |
| 1274 |
QuickGel Applicator Kit (Applicator, Base, Weights, Cup Tray) |
| 1269 |
QuickGel Dispo Sample Cups - Shallow Well (50/pkg) |
| 1258 |
QuickGel Dispo IFE Sample Cups (50/pkg) |
| 1259 |
QuickGel Dispo Sample Cups - Deep Well (50/pkg) |
| 1270 |
QuickGel Applicator Blades (10/pkg) (For manual
QuickGel assays, except Split-Beta Proteins) |
| 1271 |
QuickGel Modified Applicator Blades (10/pkg) (For manual
QuickGel Split-Beta Proteins) |
Additional Supplies and Equipment for QuickGels
| Cat. No. |
Item |
| 1262 |
QuickGel Gel Block Remover |
|
